3DP Workbench Manual - Página 7

Procurar online ou descarregar pdf Manual para Impressoras 3D 3DP Workbench. 3DP Workbench 12 páginas. Moving and folding the gantry

3DP Moving and Folding the Gantry

Approved By:

Date: <6/14/2016>

Page 6 of 11

Step 5: Folding the Z axis.

With the 4mm hex wrench remove the 8 bolts securing the Z axis to the bed rails. Always

have an assistant hold the gantry upright while removing the bolts.

Carefully lay the X axis down on to the built in support arm and re-insert bolts to secure

the axis in place before moving.

Note: The extruder head position may need to be slightly adjusted to clear the

E-stop button.

WI XXXX-xxxxxx– 3DP Moving the Printer