Camfil CC400 Technical Manual - Page 16
Browse online or download pdf Technical Manual for Air Cleaner Camfil CC400. Camfil CC400 18 pages. Air cleaners concealed
Print Page
19.Air Cleaner system
Air Cleaner Consealed CC400 manual,
TECHNICAL MANUAL
Air Cleaner CC400 Concealed
Two air purifiers work together
in a cleaning system.
In compartment 1, the incoming air creates
overpressure. This means that the air, after it
has passed through the air purifier, is
transported to compartment 2. There, the air
is sucked through another Air Cleaner, which
further raises the air quality. You can also
use various effective filters in the air purifiers
to control the air quality. In this instance, a
class H13 filter is used in compartment 1,
where the contaminated incoming air enters.
This method is
used in premises used for production, in air
locks as well as in other environments.
Over pressure.
Exactly as in the example above,
overpressure is created when the air is
purified and enters the compartment. By
doing this, a thoroughly controlled indoor
environment is achieved in the
space in question. This is useful in processes
such as those involving installation, food,
electronic installation, and other sensitive
production units.
Under pressure.
In this example, the air is sucked from the
compartment and purified before it is
discharged into the room. Air Cleaner also
makes it possible to clean the air many times
before allowing it to be released, in order to
achieve increased control over the air quality.
Under pressure is used, for example, on
building sites, and in industries and places
where a small dirty production area in large
premises
Cleaning zone in open premises.
In this example, the air is purified in the Air
Cleaner unit's HEPA filter. Then it passes
through the pipe along the ceiling, where
air
Is discharged from the holes along the wall.
The purified air thus creates a sort of curtain
that divides the room into two zones; one with
higher quality air and one with lower quality
air.
Ver. 001
16
Oct 2018