Acoustic Signature TA-9000 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Music Equipment Acoustic Signature TA-9000. Acoustic Signature TA-9000 8 pages. Pick-up arm

Print Page

1. Preparing the arm mounting board

To mount the TA 5000 tonearm your turntable need´s to have a

23mm thru hole combined with 3 M3 thread´s around it at the

Radius of 20.5mm (see drawing). Rega Dimension. SME versions

are also offered.

Ensure that the thread´s are positioned as showed in the drawing.

The distance of the center hole to the middle of the platter must be:

222 mm for the 9 inch version

295,60 mm for the 12 inch version

2. Fitting the arm SME type

Take the provided 4 screws and put them into the marked 4 holes.

Use the provided allen key to tighten the screw´s.

To get easier access to the holes it might be helpful to turn the

armtube so the holes are free, or take the arm out and assemble

the armbase first.

3. Antiskating

To adjust the Antiskating use the Antiskating Adjustment knob and

adjust the correct value by turning.

Antiskating knob