Acoustic Signature TA-9000 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Music Equipment Acoustic Signature TA-9000. Acoustic Signature TA-9000 8 pages. Pick-up arm

Print Page

5. Prepare adjusting the cartridge

Before we start aligning the cartridge we we need to pre adjust

the Tracking force and the height of the tonearm. Tracking force

will be adjusted by turning the counter weight forward (more

weight) or backward (for less weight). Search the manual of your

cartridge for the right value and adjust it by using a weight scale

(not provided). After you have done the setup of the Tracking force

please tighten the 3 small screws to fix the position of the weight.

5.1 Prepare adjusting the cartridge

Adjust the arm height with cartridge fitted, is either level or slightly

low at the front end. You can do this by opening the red marked

screw with the provided allen key. Open it carefully adjust the

needed height and tighten the screw softly. Check if height is ok -

if not redo the adjustment. Be aware the when opening the screw

the arm might fall down!

6. Adjusting the cartridge

This is done by using the provided adjustment template. Take the

template and assemble it as shown and place it on the platter.

Some units also come pre assembled.