ABC Office 3905 U Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Cutter ABC Office 3905 U. ABC Office 3905 U 7 pages.

Print Page
The knife locking device secures the knife in its top position. A cutting operation can only be
carried through when the hand guard is in the down position and the locking device is released
CAUTION – Do not place hands or fingers under blade if knife lever is not locked.
3.
Knife
Make of high quality steel.
4.
Cutting Stick
Make of PE, exchangeable. Can be used two times on each side.
5.
Hand Guard
The hand guard must be lowered before each cutting operation. Only then the locking device can
be released. The knife guard can only be reopened when the knife lever is locked in the top
position. DO NOT under any circumstances, disassemble or make the hand guard inoperable.
6.
Flick action clamping system
For holding the paper pile which has to be cut.
Handle lever to the right.
Flick action clamping system open.
Hand lever to the left.
Flick action clamping system closed, ready to cut.
7.
Cover
Attached to the machine with two screws. Disassemble only in case of knife change or
maintenance.
8.
Knife adjustment
The knife can be adjusted without the knife being loosened by using the adjustment screw (#8).
Turn to the left (+).
Knife adjustment downwards.
Turn to the right (-).
Knife adjustment upwards.
Max. adjustment approx. 2 mm.
Please note – A knife which is adjusted too deeply does not only damage the cutting stick, but the
knife itself. Optimal adjustment: when the last sheet is cut accurately.
9.
Back Gauge Crank
The crank is indirectly connected with the back gauge. Connection is made by a slight push of the
crank toward the machine. The connection is released when the pulling the crank towards the
operator.
Turn to the right.
Back gauge moves towards the knife.
Turn to the left.
Back gauge moves away form the knife.
4