ABC Office 3905 U Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przecinak ABC Office 3905 U. ABC Office 3905 U 7 stron.

The knife locking device secures the knife in its top position. A cutting operation can only be

carried through when the hand guard is in the down position and the locking device is released

CAUTION – Do not place hands or fingers under blade if knife lever is not locked.

Knife

Make of high quality steel.

Cutting Stick

Make of PE, exchangeable. Can be used two times on each side.

Hand Guard

The hand guard must be lowered before each cutting operation. Only then the locking device can

be released. The knife guard can only be reopened when the knife lever is locked in the top

position. DO NOT under any circumstances, disassemble or make the hand guard inoperable.

Flick action clamping system

For holding the paper pile which has to be cut.

Handle lever to the right.

Flick action clamping system open.

Hand lever to the left.

Flick action clamping system closed, ready to cut.

Cover

Attached to the machine with two screws. Disassemble only in case of knife change or

maintenance.

Knife adjustment

The knife can be adjusted without the knife being loosened by using the adjustment screw (#8).

Turn to the left (+).

Knife adjustment downwards.

Turn to the right (-).

Knife adjustment upwards.

Max. adjustment approx. 2 mm.

Please note – A knife which is adjusted too deeply does not only damage the cutting stick, but the

knife itself. Optimal adjustment: when the last sheet is cut accurately.

Back Gauge Crank

The crank is indirectly connected with the back gauge. Connection is made by a slight push of the

crank toward the machine. The connection is released when the pulling the crank towards the

operator.

Turn to the right.

Back gauge moves towards the knife.

Turn to the left.

Back gauge moves away form the knife.