ClearOne MAX IP User Manual - Page 6
Browse online or download pdf User Manual for Conference Phone ClearOne MAX IP. ClearOne MAX IP 7 pages. Conferencing phone
Also for ClearOne MAX IP: Specification Sheet (3 pages), User Manual (6 pages), Datasheet (2 pages), Interoperability Manual (4 pages), Brochure (2 pages), User Manual (6 pages)
To Mute during ringing
•
Press the star (
*) or the MUTE key to mute the ringer for the duration of the ringing.
>
Note: This only mutes the current ring; the ringer is unmuted for subsequent calls.
To Adjust ringer Volume
1.
While the phone is ringing, press
2.
While the phone is inactive, press
level.
To Adjust Loudspeaker Volume
1.
Press the
VOLUME UP key while on a call to increase volume.
2.
Press the
VOLUME dOWN key while on a call to decrease volume.
To Access Your Help Line
•
While in
Standby mode, press and hold the 0 key for 2 seconds. This feature must be programmed before use.
To store a Number in the Phonebook
1.
enter the number while the phone is in
2.
Press and hold the
PHONEBOOK key until the Phonebook and Program icons appear.
3.
Assign a Phonebook location (0–9) by pressing the corresponding number key.
4.
Press the
PHONEBOOK key again to save the entry. You hear a confirmation tone.
5.
To exit
Phonebook Edit mode before saving the entry, press the CLEAr key.
To Make a Call Using the Phonebook
1.
Press the
PHONEBOOK key.
2.
Press the specific number (
displayed on the LCd screen.
3.
Press the
ON/OFF key to dial the number.
To Make an Outbound THree-WAY Call
1.
Press the
CONFErENCE key. The first party is put on hold and you are connected to a second line dial tone. Or
press the HOLd key to place the current call on hold, then press ON/OFF key to obtain the second line.
2.
dial the second party's phone number.
>Note: stored numbers are not available for dialing a second party.
If you receive a busy signal or are routed to voicemail, then press the ON/OFF key to terminate the call and
return to the first party.
3.
Press the
CONFErENCE key to join all three parties in a conference call.
VOLUME UP or VOLUME dOWN.
VOLUME UP or VOLUME dOWN. The ringer melody plays once at the new
Standby (Inactive) mode.
Phonebook and Program icons
0-9) that corresponds with the stored phone number you want to dial. The number is
Figure 5 - MAX IP Phonebook and Program Icons
MAX IP User's Guide
3