1 BY ONE Audio-Technica AT3600 Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Turntable 1 BY ONE Audio-Technica AT3600. 1 BY ONE Audio-Technica AT3600 14 pages. Belt drive turntable with built in speakers

Print Page

NOTE: In order to achieve the best sound, it is advised to set the turntable volume

to a minimal level. Then the turntable's audio will be played back through your own

ampliﬁer, speakers, etc.

1.Setting Phono & Line Out Switch

This product has a built-in phono equalizer function. You can use the product even if

you do not have a phono ampliﬁer or connectable equipment with a built-in phono

ampliﬁer.

Use the Phono & Line Out Switch to set the output, as shown below.

Connectable device being

Position of the Phono &

used

Line Out Switch

Device with phono input

PHONO

Device without phono

LINE

input

NOTE: The RCA Jacks are not designed to be connected directly to the

passive/unpowered speakers on LINE mode. If connected to the passive

speakers, there will be no sound.

RCA wired connection

Active Speakers

Amplifier

Where to connect RCA

audio cable

Phono input jack and

ground (earth) terminal

of connected equipment

AUX or line input jack of

connected equipment

2. Connecting the device

Align the settings for the Phono & Line Out Switch and connect the

RCA audio cable to an input jack that is compatible with the connectable

equipment you are using (ampliﬁer, active speakers, etc.).

• The RCA audio cable's red jack is for the right (R) channel, and the white jack is

for the left (L) channel.

With PHONO

OFF

POWER

USB-PC

To outlet

With PHONO

PHONO

Without PHONO

PHONO

LINE OUT

DC IN

AUX IN

AUX OUT

15V

Connectable equipment

(Amplifier, etc.)

Without PHONO

AUX