DIYRE COLOUR DUO Operation Manual - Page 4

Browse online or download pdf Operation Manual for Music Mixer DIYRE COLOUR DUO. DIYRE COLOUR DUO 13 pages. 2-channel colour channel strip

Print Page

Front Panel Description

GAIN

(not labeled): Sets the mic preamp gain, between +20 and +66dB

48V

: Engages phantom power

HPF

: Engages the 80Hz high-pass filter

COLOUR

: Engages the Colour section. When this switch is out the entire Colour section, including the controls

for

TRIM

and

MIX

, is bypassed.

: Flips the polarity of the mic signal by 180 degrees

PAD

: Engages the -20dB pad

MIC/LINE

: Switches between

the

MIC INPUT

jack, and the Gain knob and all preamp switches are in-circuit. In

from the

LINE INPUT

jack and the

COLOUR KNOB

x 3 (not labeled): Adjusts the level of each Colour without changing the overall gain

COLOUR SWITCH

x 3 (not labeled): Engages each Colour and also indicates which Colour is in each position.

Every Colour module automatically sets the LED to a unique hue when installed.

TRIM

: Adjusts the post-Colour volume by -14/+10dB; set to the center position for unity gain.

MIX

: Blends the dry signal with the output from the Colours

ACTIVE

: Engages/disengages power to the drawer. Turn the

prevent pops, then engage the switch after re-inserting the drawer.

MIC

(default) and

LINE

(pressed in) modes. In

48V

HPF

, and

PAD

MIC

mode the input is taken from

LINE

switches are disabled.

ACTIVE

switch off before removing the drawer to

mode the input is taken