DIYRE COLOUR DUO Посібник з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Музичний мікшер DIYRE COLOUR DUO. DIYRE COLOUR DUO 13 сторінок. 2-channel colour channel strip
Друкувати сторінку
Front Panel Description
GAIN
(not labeled): Sets the mic preamp gain, between +20 and +66dB
48V
: Engages phantom power
HPF
: Engages the 80Hz high-pass filter
COLOUR
: Engages the Colour section. When this switch is out the entire Colour section, including the controls
for
TRIM
and
MIX
, is bypassed.
Ø
: Flips the polarity of the mic signal by 180 degrees
PAD
: Engages the -20dB pad
MIC/LINE
: Switches between
the
MIC INPUT
jack, and the Gain knob and all preamp switches are in-circuit. In
from the
LINE INPUT
jack and the
COLOUR KNOB
x 3 (not labeled): Adjusts the level of each Colour without changing the overall gain
COLOUR SWITCH
x 3 (not labeled): Engages each Colour and also indicates which Colour is in each position.
Every Colour module automatically sets the LED to a unique hue when installed.
TRIM
: Adjusts the post-Colour volume by -14/+10dB; set to the center position for unity gain.
MIX
: Blends the dry signal with the output from the Colours
ACTIVE
: Engages/disengages power to the drawer. Turn the
prevent pops, then engage the switch after re-inserting the drawer.
2
MIC
(default) and
LINE
(pressed in) modes. In
48V
,
HPF
,
Ø
, and
PAD
MIC
mode the input is taken from
LINE
switches are disabled.
ACTIVE
switch off before removing the drawer to
mode the input is taken