AIMS Power GEN3200W120V Manual - Page 10
Browse online or download pdf Manual for Inverter AIMS Power GEN3200W120V. AIMS Power GEN3200W120V 19 pages. Portable inverter generator
Print Page
Electric start
1. Turn the fuel cock lever to the ON position.
2. Turn the choke lever to the│ │position.
3. Turn the engine switch to the START position. FIG.20
4. Turn the engine switch to the RUN position. FIG.21
5. Turn the choke lever back to the operating position.
6. Warm up the engine without a load for a few minutes.
Auto start
1.
Make sure the fuel cock lever to the ON position.
2.
Please make sure the choke lever to the │ │RUN position.
3.
Make sure the engine switch to the RUN position.
4.
Connect the cable to Auto Gen Start plug, as soon as the generator
receives the start signal, the generator will start. If the generator does
not start successfully, it will try to start again. Generator will disconnect
the circuit when the generator does not start after three times.. FIG.22
USING ELECTRIC POWER
AC APPLICATION
(a) Check the AC pilot lamp for proper voltage.
(b) Turn off the switch(s) of the electrical appliance(s) before connecting to
the generator.
(c) Insert the pulg(s) of the electrical appliance(s) into the receptacle.FIG.23
CAUTION:
Be sure the electric apparatus is turned off before plugging in.
Be sure the total load is within generator rated output.
Be sure the socket load current is within socket rated current.
The economy control switch must be turned to "OFF" when using electric
devices that require a large starting current, such as a compressor or a
submergible pump. FIG.24
9
FIG.20
FIG.21
FIG.22
AUTO GEN
START
FIG.23
FIG.24
START
RUN
ECON.SW
OFF