AIMS Power GEN3200W120V Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Falownik AIMS Power GEN3200W120V. AIMS Power GEN3200W120V 19 stron. Portable inverter generator

Electric start

1. Turn the fuel cock lever to the ON position.

2. Turn the choke lever to the│ │position.

3. Turn the engine switch to the START position. FIG.20

4. Turn the engine switch to the RUN position. FIG.21

5. Turn the choke lever back to the operating position.

6. Warm up the engine without a load for a few minutes.

Auto start

Make sure the fuel cock lever to the ON position.

Please make sure the choke lever to the │ │RUN position.

Make sure the engine switch to the RUN position.

Connect the cable to Auto Gen Start plug, as soon as the generator

receives the start signal, the generator will start. If the generator does

not start successfully, it will try to start again. Generator will disconnect

the circuit when the generator does not start after three times.. FIG.22

USING ELECTRIC POWER

AC APPLICATION

(a) Check the AC pilot lamp for proper voltage.

(b) Turn off the switch(s) of the electrical appliance(s) before connecting to

the generator.

CAUTION:

 Be sure the electric apparatus is turned off before plugging in.

 Be sure the total load is within generator rated output.

 Be sure the socket load current is within socket rated current.

 The economy control switch must be turned to "OFF" when using electric

devices that require a large starting current, such as a compressor or a

submergible pump. FIG.24

FIG.20

FIG.21

FIG.22

AUTO GEN

START

FIG.23

FIG.24

START

RUN

ECON.SW

OFF