Edic CR2 Operator's Manual - Page 4

Browse online or download pdf Operator's Manual for Ultrasonic Jewelry Cleaner Edic CR2. Edic CR2 9 pages. Professional restroom cleaner
Also for Edic CR2: Owner's/Operator's Manual (19 pages)

Print Page

1. Handle- Used to maneuver and position the CR2

2. Recovery tank lid- Allows access to recovery tank

and creates a seal to ensure suction

3. Solution tank lid- Allows access to the solution tank

and prevents external contamination of solution tank

4. Accessory racks for hoses, cords, tools etc.- One large

rack and one small rack on each side of the machine.

4 total

5. Wand storage bracket and velcro strap- Allows the

operator to secure a wand attachment to the machine

for ease of transport

6. Non-marking front 4" locking casters and rear 10"

wheels

7. Recovery/vacuum hose inlet barb- connect your

recovery vacuum hose to this barb

8. Feed hose line for chemical with threaded bottle cap-

secures the feed hose line to the chemical bottle

9. Bottle holder for chemical feed system- Holds up to a

one gallon chemical bottle

10. GFCI breaker- Interrupts and disables the electrical

system if a ground leak is detected.

11. Chemical dispensing valve- Select between chemical

and no chemical by turning to left or right as marked

12. Male twist lock pigtail- Connects to 50 ft cord

13. Exhaust port hose barb- Used to connect to hose

with blower attachment.

14. Pressure regulator- Decrease pressure by turning

counter-clockwise or increase pressure by turning

clockwise

15. Priming/pressure relief valve- Prime system in the

event of air lock. Relieves pressure in the event of

pressure lock

16. Solution line Q.D.- Pressurized connection for solu-

tion line

17. Recovery tank dump valve- Pull up to open

18. Accessory Heater (Available separately)

19. Heater mounting brackets- for accessory heater

20. Switch box- one switch marked "PUMP" and one

switch marked "VACUUM". Switches light up when

powered on.