artisan WM217 Operation Instruction Manual - Page 4

Browse online or download pdf Operation Instruction Manual for Sewing Machine artisan WM217. artisan WM217 12 pages. Medium-weight materials utility-decorative

artisan WM217 Operation Instruction Manual
Technical lnformation
Base plate
Working space to the right of the needle
Needle throw and sewing speed
4.5mm
6.0mm
8.0mm
12.0mm
Machines with cam- device for utility and decorative stitches, stitches per minute for
decorative -utility stitch
6.0mm 2,300 2,800
8.0mm 2,100 2,800
12.0mm 1,800 2,600
Machines with other extra attachments such as:
Puller
Stitch
displacement
Stitch length forward and reverse:
Max. presser foot lift:
Needle system:
Shuttle system:
Thread tension:
Raising presser foot:
265
476
:476×178mm
:265×128mm
2800 stitches per minute
2800 stitches per minute
2600 stitches per minute
2200 stitches per minute
as basic model
left-centre-right
5.5mm
8.5mm
12.0mm needle throw =134R,
No.70-120
continuous double rotation,
transverse position
double thread tension
knee lever with extra upper holding
position.
2
Important points to note:
·
Oil machine thoroughly before
using for first time.
When doing so, strictly observe
instructions.
Check
that
the
mains
corresponds to the voltage given on
the motor ,if the voltages are not the
same, do not on any
operate the machine.
Check the guards for finger, take-
up lever and belt are all present.
When the machine is running the hand
wheel should turn anti-clockwise , if it
dose not reverse the terminals on the
motor.
Use
only
recommended
system.
Clean machine regularly.
Do not start machine until the fabric
is in position under the presser foot.
When removing fabric always bring
thread
take-up
lever
at
position.
For the first 2 weeks, run machine
at only 3/4 of its maximum speed.
The presser foot can be raised either
with the hand lever or with the knee
lever.
When making adjustments to the
machine and when sewing is finished
the machine and when sewing is
finished the motor should be switched
off or disconnected at the mains.
When using a clutch motor , wait
until it has stopped.
voltage
account
needle
highest