Artison RCC300-SA Installation Manual - Page 5

Browse online or download pdf Installation Manual for Subwoofer Artison RCC300-SA. Artison RCC300-SA 15 pages.

area when installing the module.
INSTALLATION INTO AN INFINITE BAFFLE
1. Use the provided Cut-out Template to mark the desired wall location. Be sure that no piping,
wall studs, or electrical wires interfere with the placement of the RCC300-SM.
2. Once the hole is cut and the speaker wire is run, manage the speaker wire around the
RCC300-SM.
3. Connect the bare speaker wire ends to the spring-loaded binding posts.
4. Install the RCC300-SM into the cut-out made in the wall.
5. Carefully tighten the four dog leg clamps on the RCC300-SM using a #2 Philips Head
Screwdriver.
6. The grille for the RCC300-SM is held in place by magnets. Simply position the grille on the
front of the module into the recessed area.
NOTE: While installing the subwoofer module ensure any excess wire is run properly
so it does not interfere with the driver's operation.
5