Artison RCC300-SA Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Artison RCC300-SA. Artison RCC300-SA 15 pagina's.

area when installing the module.

INSTALLATION INTO AN INFINITE BAFFLE

1. Use the provided Cut-out Template to mark the desired wall location. Be sure that no piping,

wall studs, or electrical wires interfere with the placement of the RCC300-SM.

2. Once the hole is cut and the speaker wire is run, manage the speaker wire around the

RCC300-SM.

3. Connect the bare speaker wire ends to the spring-loaded binding posts.

4. Install the RCC300-SM into the cut-out made in the wall.

5. Carefully tighten the four dog leg clamps on the RCC300-SM using a #2 Philips Head

Screwdriver.

6. The grille for the RCC300-SM is held in place by magnets. Simply position the grille on the

front of the module into the recessed area.

NOTE: While installing the subwoofer module ensure any excess wire is run properly

so it does not interfere with the driver's operation.