AINA PTT Quick Manual - Page 2

Browse online or download pdf Quick Manual for Two-Way Radio AINA PTT. AINA PTT 5 pages. Voice responder
Also for AINA PTT: Quick Manual (3 pages)

Print Page

Putting your PTT Voice Responder into

WAVE-mode

NOTE! If you have a Sonim phone, please follow the Sonim

Turn on the device by pressing the Power button

Then, perform a software reset by pressing and holding both arrow buttons

and both PTT buttons simultaneously, until the LED turns off (this step is

necessary to remove any previous pairings and settings).

Turn off the device by pressing the Power button

Activate WAVE-mode by holding down the Volume-down button, while

turning on the device by pressing the Power button for more than 3 seconds.

Successful activation is indicated by an orange LED indication instead of the

normal power on LED.

Finally, put the Voice Responder into Storage mode, by pressing the Power and

Emergency button simultaneously; after the beep, first release the Power

button and then the Emergency button. Afterwards, you can turn on your

device from the Power button as usual.

Step 2. Software reset

XP8

for more than 3 seconds.

Step 4. Toggle WAVE-mode

XP5S

guide.