AINA PTT Beknopte handleiding - Pagina 2
Blader online of download pdf Beknopte handleiding voor {categorie_naam} AINA PTT. AINA PTT 5 pagina's. Voice responder
Ook voor AINA PTT: Beknopte handleiding (3 pagina's)
Pagina afdrukken
Putting your PTT Voice Responder into
A
WAVE-mode
NOTE! If you have a Sonim phone, please follow the Sonim
1.
Turn on the device by pressing the Power button
2.
Then, perform a software reset by pressing and holding both arrow buttons
and both PTT buttons simultaneously, until the LED turns off (this step is
necessary to remove any previous pairings and settings).
3.
Turn off the device by pressing the Power button
4.
Activate WAVE-mode by holding down the Volume-down button, while
turning on the device by pressing the Power button for more than 3 seconds.
Successful activation is indicated by an orange LED indication instead of the
normal power on LED.
5.
Finally, put the Voice Responder into Storage mode, by pressing the Power and
Emergency button simultaneously; after the beep, first release the Power
button and then the Emergency button. Afterwards, you can turn on your
device from the Power button as usual.
Step 2. Software reset
XP8
or
for more than 3 seconds.
for more than 3 seconds.
Step 4. Toggle WAVE-mode
XP5S
guide.