ARTRED AR50 Operation Manual - Page 6

Browse online or download pdf Operation Manual for Scrubber ARTRED AR50. ARTRED AR50 12 pages.

Print Page

2.0 Functions and matters needing attention

Functions
Anrunto-B50 floor scrubber is suitable for cleaning flat ground. It uses two 15-inch brush
discs or needle holders to clean the ground. The dirty water washed is sucked into the sewage
tank by the suction pick behind the machine. It can complete the cleaning work only by walking
the machine on the ground once.
Matters needing attention
This equipment is an efficient hard ground cleaner with cleaning and water absorption
1.
functions, but it does not have the function of cleaning the ground. The ground debris
should be cleaned before use, so as to avoid winding and blocking the machine and affect
its normal work.
This equipment is suitable for cleaning on smooth hard ground. If there are cracks in
2.
floor tile or rough stone ground, it can clean dirt, but it can not absorb water completely
like smooth ground.
This equipment is specially designed for use on flat ground. Do not run or work on
3.
slopes to avoid danger.
The equipment shall be stored and parked horizontally, and non-professionals shall be
4.
prohibited from operating the equipment.
Do not start and install the equipment in flammable, explosive and chemical
5.
environment.
This equipment is powered by battery. The acid in battery can burn skin and eyes.
6.
Operators should wear protective clothing and glasses when inspecting battery to prevent
accidents.
It is strictly forbidden to place any metal articles on the battery in order to avoid
7.
damaging the battery.
It is strictly forbidden to burn around when charging. If the charger matches the battery,
8.
the battery will be damaged by using the mismatched charger, which may cause the
battery to burst in serious cases.
Operators should not wear slippers or barefoot when operating this equipment.
9.
Do not put your hands and feet in the rotating brush disc.
10.
All kinds of operation safety labels on the equipment should be kept clear and intact.
11.
Electrical operation parts should avoid the infiltration of water and other liquids, and
12.
- 5 -