3M Digital Projector X30 Product Warranty And Safety Manual - Page 14

Browse online or download pdf Product Warranty And Safety Manual for Projector 3M Digital Projector X30. 3M Digital Projector X30 19 pages. Technical
Also for 3M Digital Projector X30: Specification Sheet (2 pages), Operator's Manual (20 pages)

Print Page

3M Digital Projector X30 Product Warranty And Safety Manual

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the screw (marked by arrow) (1) of the lamp door (2) and

2. Retaining screws

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: lowly pick up the lamp by the handles (4).

4. Insert lamp module :

Optional Lamp: 78-6972-0008-3

While putting the interlocking parts of the lamp door (2) and the projector together, slide the lamp

door (2)

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

3M™ Digital Projector X30 Product Warranty and Safety Guide

Note

then slide and lift the lamp door (2) to the side to remove it.

: Loosen the 3 screws (marked by arrow) (3) of the lamp.

Note

Never loosen any other screws.

that are loosened in the previous process to lock it in place.

(Contact 3M Customer Service.)

(DT01025)

Note

(2) Lamp access door

(1) of the lamp door (2).

(3) Screws

(3) of the lamp

(4) Handle