DO HEATING Austen Fixing Instructions - Page 3

Browse online or download pdf Fixing Instructions for Bathroom Fixtures DO HEATING Austen. DO HEATING Austen 8 pages. Towel rail

Print Page
Content list & Tools required
Review instructions carefully before installation.
Installation should be completed by a suitably qualified person.
Please dispose of packaging in a responsible manner.
INSTALLATION GUIDE
INSTALLATION GUIDE
INSTALLATION GUIDE
INSTALLATION GUIDE
INSTALLATION GUIDE
G
B
E
B
D
F
A
A
C
A
B
G
G
E
E
D
D
E
F
G
F
J
C
I
C
IMPORTANT NOTE
C
IMPORTANT NOTE
IMPORTANT NOTE
B
A
IMPORTANT NOTE
A
E
INSTALLATION GUIDE
INSTALLATION GUIDE
Installation information in this section
G
includes below products!
E
ELECTRIC DRILL &
ARES, NORTE, RAMSEY
Installation information in this section
G
Contents list
DRILL BIT
D
includes below products!
INSTALLATION GUIDE
ELECTRIC DRILL &
Installation information in this section
G
E
DRILL BIT
ARES, NORTE, RAMSEY
includes below products!
F
Installation information in this section
G
CONTENT OF MOUNTING SET
E
D
includes below products!
ARES, NORTE, RAMSEY
C
Installation information in this section
Ref
E
G
Installation information in this section
ARES, NORTE, RAMSEY
D
F
includes below products!
Decorative Cap (x6)
includes below products!
Installation information in thi
Installation information in this section
CONTENT OF MOUNTING SET
A
G
D
E
Only for mirror finished products
ARES, NORTE, RAMSEY
F
includes below products!
C
A
ARES, NORTE, RAMSEY
B
CONTENT OF MOUNTING SET
A
E
F
D
ARES, NORTE, RAMSEY
Decorative Cap (x6)
C
CONTENT OF MOUNTING SET
A
Blind Plug (x5)
Only for mirror finished products
ADONIS, BLIZZARD, BLUEBELL, C
C
D
Wall Mounting
F
B
Decorative Cap (x6)
B
A
A
Bracket
CONTENT OF MOUNTING SET
B
Only for mirror finished products
Decorative Cap (x6)
F
D
Wall Mounting
A
C
Blind Plug (x5)
CONTENT OF MOUNTING SET
Only for mirror finished products
B
A
Screw (x4)
CONTENT OF MOUNTING SET
Wall Mounting
C
Wall plug (x4)
ELITE, FALCON, GEMINI, HERA, JU
B
Decorative Cap (x6)
A
B
Bracket
(x4)
C
C
A
Blind Plug (x5)
Air Vent (x1)
Only for mirror finished products
Wall Mounting
D
E
Decorative Cap (x6)
Decorative Cap (x6)
Bracket
B
A
A
B
Wall Mounting
Blind Plug (x5)
G
Wall Mounting
Only for mirror finished products
Only for mirror finished products
Wall plug (x4)
D
Setscrew (x4)
Screw (x4)
D
Bracket
(x4)
NIRVANA, OLYMPOS, SONYA, R
Air Vent (x1)
Diverter (x1)
B
A
A
D
B
E
C
F
Wall Mounting
Wall plug (x4)
Bracket
(x4)
G
H
Air Vent (x1)
E
D
E
Wall Mounting
Air Vent (x1)
Diverter (x1)
Wall Mounting
Wall plug (x4)
Setscrew (x4)
VOLGA, ZENITH, LARIS, SAMOS,
G
Installation information in this section
Bracket
(x4)
E
D
G
H
Diverter (x1)
Air Vent (x1)
F
includes below products!
D
E
F
G
BIANCA, UNO, MALIBU
H
Air Vent (x1)
Installation information in this section
E
Diverter (x1)
G
Air Vent (x1)
includes below products!
G
Installation information in this section
E
CONTENT OF M
BIANCA, UNO, MALIBU
G
includes below products!
Installation information in this section
CONTENT OF MOUNTING SET
G
H
E
J
includes below products!
BIANCA, UNO, MALIBU
Installation information in this section
Decorative Cap (x1)
E
Only for mirror finished products
BIANCA, UNO, MALIBU
G
C
CONTENT OF MOUNTING SET
includes below products!
Tools required
Installation information in this section
J
A
E
I
G
BIANCA, UNO, MALIBU
CONTENT OF MOUNTING SET
includes below products!
Decorative Cap (x1)
Blind Plug (x1)
Only for mirror finished products
J
G
CONTENT OF MOUNTING SET
C
Installation information in this section
BIANCA, UNO, MALIBU
Wall Plug (x12)
Decorative Cap (x1)
J
A
B
includes below products!
I
Only for mirror finished products
G
C
CONTENT OF MOUNTING SET
Decorative Cap (x1)
Blind Plug (x1)
Wall Mounting
E
Only for mirror finished products
A
Screw (x12)
J
C
I
BIANCA, UNO, MALIBU
Wall Plug (x12)
G
CONTENT OF MOUNTING SET
Decorative Cap (x1)
A
B
C
Blind Plug (x1)
I
Screw cap (x12)
Only for mirror finished products
J
C
E
G
Wall Plug (x12)
Decorative Cap (x1)
A
B
I
I
Only for mirror finished products
Wall Plug (x12)
Air Vent (x1)
B
C
E
Holder (x12)
CONTENT OF MOUNTING SET
Screw cap (x12)
A
A
I
E
G
J
Wall Plug (x12)
Decorative Cap (x1)
Blind Plug (x1)
I
Screw cap (x12)
Wall Mounting
B
• Place your radiator at least 12.5 cm above the floor.
Only for mirror finished products
E
G
Wall Plug (x12)
Screw (x12)
Screw cap (x12)
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
A
IMPORTANT NOTE
I
B
• Apply silicone seal fluid to all treaded parts containing o-rings.
A
B
C
E
• Connect your radiator to the utilities after following all the installation steps in the manual.
I
Screw cap (x12)
B
• Place your radiator at least 12.5 cm above the floor.
A
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before com
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
A
I
• Place your radiator at least 12.5 cm above the floor.
Screw cap (x12)
Screw Cap
• Apply silicone seal fluid to all treaded parts containing o-rings.
Wall Plug (x12)
B
Air Vent (x1)
Holder (x12)
• Connect your radiator to the utilities after following all the installation steps in the manual.
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
• Place your radiator at least 12.5 cm above the floor.
IMPORTANT NOTE
A
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before commissioning.
• Apply silicone seal fluid to all treaded parts containing o-rings.
I
B
E
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
G
J
• Connect your radiator to the utilities after following all the installation steps in the manual.
• Apply silicone seal fluid to all treaded parts containing o-rings.
• Place your radiator at least 12.5 cm above the floor.
A
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before com
• Connect your radiator to the utilities after following all the installation steps in the manual.
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before commissioning.
Screw cap (x12)
• Apply silicone seal fluid to all treaded parts containing o-rings.
• Place your radiator at least 12.5 cm above the floor.
• Connect your radiator to the utilities after following all the installation steps in the manual.
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
IMPORTANT NOTE
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before commissioning.
• Apply silicone seal fluid to all treaded parts containing o-rings.
I
• Connect your radiator to the utilities after following all the installation steps in the manual.
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before c
• Place your radiator at least 12.5 cm above the floor.
• Provide insulation by wrapping PTFE tape on the treads before installing the valves.
• Apply silicone seal fluid to all treaded parts containing o-rings.
• Connect your radiator to the utilities after following all the installation steps in the manual.
• After connecting to the utilities, do not forget to discharge the trapped air inside the radiator before commissioning.
Installation information in thi
ASOS, DAPHNE, KEOPS, LAR
SIERRA, STORM, TERRA, VI
TOOLS REQUIRED FOR INSTALLATION
SPIRIT LEVEL
ELECTRIC DRILL &
&
DRILL BIT
TOOLS REQUIRED FOR INSTALLATION
TOOLS REQUIRED FOR INSTALLATION
CORDLESS
&
CROSS POINT
ELECTRIC DRILL &
SPIRIT LEVEL
TOOLS REQUIRED FOR INSTALLATION
&
SCREWDRIVER
DRILL BIT
(BIT PH2)
SPIRIT LEVEL
ELECTRIC DRILL &
&
&
DRILL BIT
&
CROSS POINT
SPIRIT LEVEL
CORDLESS
METRIC RULER
SCREWDRIVER
SCREWDRIVER
INSTALLATION
(BIT PH2)
&
CROSS POINT
CORDLESS
&
CROSS POINT
SPIRIT LEVEL
CORDLESS
ELECTRIC DRILL &
SPIRIT LEVEL
SCREWDRIVER
SCREWDRIVER
SCREWDRIVER
DRILL BIT
1
(BIT PH2)
(BIT PH2)
INSTALLATION
SPIRIT LEVEL
ELECTRIC DRILL &
DRILL BIT
Icon
Description
1
INSTALLATION
INSTALLATION
1
2
Wall Mounting
Blind Plug (x5)
Screw (x4)
1
Decorative Cap
1
C
B
1
Wall Mounting
1
Screw (x4)
Wall plug (x4)
Blind Plug
Setscrew (x4)
90°
1
Wall Mounting
(x4)
C
Blind Plug (x5)
Screw (x4)
E
F
C
B
Wall Mounting Screw
Setscrew (x4)
Wall Mounting
1-
Adjust the height of your radiator
Diverter (x1)
Screw (x4)
by using a metric ruler.
F
Wall plug (x4)
Setscrew (x4)
(x4)
Wall Mounting
2-
C
Blind Plug (x5)
Set the location of your radiator
H
Wall Mounting Bracket
Screw (x4)
E
1-
F
as desired, align with the ground by
Adjust the height of your radiator
B
C
by using a metric ruler.
using a spirit level and mark the
Setscrew (x4)
2-
1-
Set the location of your radiator
position of the wall mounting
Adjust the height of your radiator
Diverter (x1)
Wall plug
by using a metric ruler.
F
as desired, align with the ground by
Wall plug (x4)
brackets.
Setscrew (x4)
Bracket
2-
(x4)
H
Set the location of your radiator
using a spirit level and mark the
1-
Adjust the height of your radiator
E
F
as desired, align with the ground by
position of the wall mounting
Setscrew
by using a metric ruler.
using a spirit level and mark the
brackets.
2-
Set the location of your radiator
position of the wall mounting
Diverter (x1)
INSTALLATION
as desired, align with the ground by
brackets.
Air Vent
H
using a spirit level and mark the
1
position of the wall mounting
INSTALLATION
brackets.
Blind Plug (x1)
Wall Mounting
1
1
INSTALLATION
Screw (x12)
2
B
C
1
Wall Mounting
1
Decorative Cap (x2)
Screw (x12)
Screw Cap
Air Vent (x1)
INSTALLATION
Blind Plug (x1)
Wall Mounting
Holder (x12)
C
1
90°
(Only for mirror finished products)
Screw (x12)
G
J
1
Cross
B
C
Screw Cap
Air Vent (x1)
Holder (x12)
Wall Mounting
Screwdriver
Screw (x12)
1-
Screw Cap
J
Air Vent (x1)
Adjust the height of your radiator by
A
Holder (x12)
Blind Plug (x1)
1
Wall Mounting
C
using a metric ruler.
Screw Cap
Screw (x12)
G
J
2-
Set the location of your radiator as
B
C
1-
Screw Cap
desired, align with the ground by using
Adjust the height of your radiator by
Air Vent (x1)
Spirit
Holder (x12)
using a metric ruler.
a spirit level and mark the position of
2-
1-
Screw Cap
Level
J
Set the location of your radiator as
Air Vent (x1)
the wall mounting brackets.
Adjust the height of your radiator by
Holder (x12)
using a metric ruler.
desired, align with the ground by using
2-
G
J
Set the location of your radiator as
a spirit level and mark the position of
desired, align with the ground by using
Wall Mounting
the wall mounting brackets.
a spirit level and mark the position of
the wall mounting brackets.
Steel Tape
Screw (x4)
1-
Adjust the height of your radiator by
using a metric ruler.
2-
Set the location of your radiator as
C
desired, align with the ground by using
a spirit level and mark the position of
Hammer
the wall mounting brackets.
Wall Plug (x4)
Step Ladder
(for high
products)
E
Allen Key
10mm
Masonry Bit
Electric Drill
& Cordless
Screwdriver
TOOLS REQUIRED FOR INSTA
&
CORDLESS
&
CROSS POINT
TOOLS REQUIRED FOR INSTA
METRIC RUL
SCREWDRIVER
SCREWDRIVER
(BIT PH2)
&
METRIC RULER
HAMMER
SCREWDRIVER
INSTALLATION
ELECTRIC D
&
CROSS POINT
CORDLESS
METRIC RUL
TOOLS REQUIRED FOR INSTA
SCREWDRIVER
SCREWDRIVER
STEP LADDER
AL
HAMMER
(BIT PH2)
1
DRILL
(FOR HIGH PRODUCTS)
2
&
STEP LA
METRIC RULER
HAMMER
METRIC RULER
HAMMER
SCREWDRIVER
INSTALLATION
1
(FOR HIG
2
&
CROSS POINT
CORDLESS
METRIC RU
2
SCREWDRIVER
SCREWDRIVER
1
(BIT PH2)
Qty
2
90°
2
2
1
1
INSTALLATION
2
2
90°
2
2
2
1
1
90°
2
1
1-
Adjust the height of your radiator
1
by using a metric ruler.
90°
2-
Set the location of your radiator
4
1-
as desired, align with the ground by
Drill holes (Ø 10 m
90°
90°
you have marked.
using a spirit level and mark the
3
1-
2-
Adjust the height of your radiator
Nail the wall plug
position of the wall mounting
4
by using a metric ruler.
by using a hammer
1-
brackets.
Drill holes (Ø 10 mm) into the spots
2-
3-
Set the location of your radiator
Screw the wall m
you have marked.
all the way to the ho
as desired, align with the ground by
2-
1-
Nail the wall plugs (E) in the holes
Drill holes (Ø 10 m
4
of a screwdriver.
3
by using a hammer.
using a spirit level and mark the
you have marked.
3-
1-
2-
Screw the wall mounting brackets
position of the wall mounting
Adjust the height of your radiator
Nail the wall plug
1-
all the way to the holes with the help
by using a metric ruler.
Drill holes (Ø 10 mm) into t
by using a hammer
INSTALLATION
brackets.
4
of a screwdriver.
2-
3-
you have marked.
Screw the wall m
Set the location of your radiator
2-
all the way to the ho
1
as desired, align with the ground by
Nail the wall plugs (E) in t
of a screwdriver.
by using a hammer.
using a spirit level and mark the
2
1
3-
position of the wall mounting
Screw the wall mounting
1
INSTALLATION
2
brackets.
all the way to the holes with
1
of a screwdriver.
2
1
90°
2
2
1
1
2
INSTALLATION
90°
1
2
1
90°
Blin
2
1-
Adjust the height of your radiator by
2
1
using a metric ruler.
90°
1
2
2-
Set the location of your radiator as
2
90°
1-
desired, align with the ground by using
Drill holes (Ø 10 m
B
you have marked.
a spirit level and mark the position of
1-
2-
Adjust the height of your radiator by
Nail the wall plug
the wall mounting brackets.
using a metric ruler.
by using a hammer
1-
Drill holes (Ø 10 mm) into the spots
90°
2-
Set the location of your radiator as
you have marked.
desired, align with the ground by using
2-
1-
Nail the wall plugs (E) in the holes
Drill holes (Ø 10 m
a spirit level and mark the position of
by using a hammer.
you have marked.
1-
2-
the wall mounting brackets.
Adjust the height of your radiator by
Nail the wall plug
using a metric ruler.
by using a hammer
2-
Set the location of your radiator as
Wall Mou
desired, align with the ground by using
a spirit level and mark the position of
1-
Drill holes (Ø 10 mm) into t
the wall mounting brackets.
you have marked.
2-
Nail the wall plugs (E) in th
D
by using a hammer.
Set
F