Fleetminder NxtG-V Install Manual - Page 13

Browse online or download pdf Install Manual for Measuring Instruments Fleetminder NxtG-V. Fleetminder NxtG-V 15 pages.

Print Page
Typical Connection with LED
Note:
1. OUT1 will latch the output state during reset.
2. Many modern relays come with a flyback diode pre-installed internal to the relay itself. If
the relay has this diode, ensure the relay polarity is properly connected. If this diode is not
internal, it should be added externally. A common diode such as a 1N4004 will work in most
circumstances.

2.12. Device Status LED

NxtG-V LED on the Case