Fleetminder NxtG-V Instrukcja instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przyrządy pomiarowe Fleetminder NxtG-V. Fleetminder NxtG-V 15 stron.

Typical Connection with LED

Note:

1. OUT1 will latch the output state during reset.

2. Many modern relays come with a ﬂyback diode pre-installed internal to the relay itself. If

the relay has this diode, ensure the relay polarity is properly connected. If this diode is not

internal, it should be added externally. A common diode such as a 1N4004 will work in most

circumstances.

2.12. Device Status LED

NxtG-V LED on the Case