Clippasafe 108 Instructions Manual - Page 10
Browse online or download pdf Instructions Manual for Indoor Furnishing Clippasafe 108. Clippasafe 108 12 pages. Wooden playpen with base mat
Print Page
5.
Attach a wall post (J) to each of the panels of the barrier that will be fixed to the wall using
two connectors (A).
Screw a nut (C) onto each spindle (B). Place the square nuts (D) into the slots provided at the
top and bottom of the wall posts (J), then screw a spindle (B), with nut (C) into each square
nut (D).
2x
2x
2x
6.
Mark the position for the wall fixings (E) & (F) on one of the wall surfaces. The top hole for
the upper wall catch (E) should be 805mm from the floor. The top hole for the lower wall
cup (F) should be 125mm from the floor.
Fix the catch and wall cup using the appropriate fixings depending on the surface available:
wood screws for wooden surfaces, appropriate wall-plugs and screws for brick / concrete /
plaster walls and metal screws for metal surfaces. These screws and fixings are not provided.
Use Size 6 (3.5mm diameter) flat headed countersunk screws of minimum length 25mm.
1x
1x
805mm
125mm