Clockaudio CDT100 User Manual - Page 2

Browse online or download pdf User Manual for Accessories Clockaudio CDT100. Clockaudio CDT100 17 pages. Dante transporter
Also for Clockaudio CDT100: User Manual (16 pages)

Print Page
The symbols below are internationally accepted symbols that warn of potential hazards with electrical products.
This symbol, wherever it appears, alerts you to the presence of un-insulated dangerous voltage inside the enclosure -
voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying
literature. Please read the manual
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and third grounding prong. The wider blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/accessories as specified by Clockaudio.
12.
Use only with the bracket specified by the manufacturer.
13.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, if the ap-
paratus has been exposed to rain or moisture, does not operate normally or has been dropped.
14.
This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
15.
If rack mounting, provide adequate ventilation. Equipment may be located above or below this apparatus but some
equipment (like large power amplifiers) may cause an unacceptable amount of hum may generate too much heat and
degrade the performance of this apparatus.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
©
Clockaudio 2015

IMPORTANT SAFETY INSTRUCTIONS

2
CDT100 User Manual