DOHSE AQUARISTIK 43000 Instructions For Use Manual - Page 13
Browse online or download pdf Instructions For Use Manual for Aquariums DOHSE AQUARISTIK 43000. DOHSE AQUARISTIK 43000 16 pages.
Print Page
6. Reset
Should your HOBBY pH-Control eco not function correctly, please perform a
reset:
1. Unplug from mains
2. Plug the mains plug back in while keeping the
3. Release the
Please note: All programmed settings, except those for the clock, are
lost. The HOBBY pH-Control eco will regulate with factory's presettings.
7. Factory Presetting
After the event of a power failure, the HOBBY pH-Control eco starts with the
factory presetting again.
Clock setting:
Single / toggle mode:
pH point:
pH Alarm:
pH calibration memory function:
CO ² -Night off function:
8. Source of Fault
In the case of a problem, first reset to the factory settings. If this does not
solve the problem, please search for the fault in the following table:
button
12:00
Single mode
7.0
OFF (0.0 means 'no alarm')
ON
Off (CO ² is supplied during the night)
button pressed
13