DOHSE AQUARISTIK 43000 Kullanım Kılavuzu - Sayfa 13

Akvaryumlar DOHSE AQUARISTIK 43000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DOHSE AQUARISTIK 43000 16 sayfaları.

6. Reset

Should your HOBBY pH-Control eco not function correctly, please perform a

reset:

1. Unplug from mains

2. Plug the mains plug back in while keeping the

3. Release the

Please note: All programmed settings, except those for the clock, are

lost. The HOBBY pH-Control eco will regulate with factory's presettings.

7. Factory Presetting

After the event of a power failure, the HOBBY pH-Control eco starts with the

factory presetting again.

Clock setting:

Single / toggle mode:

pH point:

pH Alarm:

pH calibration memory function:

CO ² -Night off function:

8. Source of Fault

In the case of a problem, first reset to the factory settings. If this does not

solve the problem, please search for the fault in the following table:

button

12:00

Single mode

7.0

OFF (0.0 means 'no alarm')

Off (CO ² is supplied during the night)

button pressed