Doka 588676000 Original Operating Instructions - Page 3

Browse online or download pdf Original Operating Instructions for Construction Equipment Doka 588676000. Doka 588676000 18 pages.

Print Page

Original Operating Instructions Framax stripping corner I hydraulic

Intended use

The Framax stripping cylinder I is for hydraulic actua-

tion of the Framax stripping corner I.

With the 'Framax stripping corner I hydraulic', formwork

up to 5.40 metres high can be erected and stripped out

without the application of manual force.

Depending on requirements, the Framax stripping cyl-

inder can be combined with various hydraulic units and

accessories

Compatible hydraulic units

▪

Hydraulic unit Framax V4 with

- Cordless screwdriver 18 V (1800 rotation/min)

▪

Hydraulic unit V45 50/60Hz with

- System pressure controller Xclimb 60 V45

▪

Hydraulic unit SCP V1200 50/60Hz with

- Coupling adapter Framax stripping cylinder I

(intended use)

NOTICE

▪

Other use or use not in conformity with that

stated above is non-intended use and

requires the prior written approval of the

Doka company!

999239002 - 07/2018

Boundary conditions for use

NOTICE

The Framax stripping cylinder I is suitable for

deployment at outside temperatures

of between -5° C and +55° C.

Putting into service at temperatures below

-5 °C is not permissible, as the hydraulic oil

would be too viscous.

Maintenance & inspection

NOTICE

▪

Doka accepts no liability for products that

have been altered!

▪

Repairs may be carried out only by Doka or

specialist companies authorised by Doka!

▪

The Framax stripping cylinder I must be

inspected by an expert once a year.

Storage

NOTICE

To avoid damage, the drive components must

be stored in such a way that they are protected

against direct climatic influences and aggres-

sive substances.