Cypress Suprex SPX-5600 Series Operation Manual - Page 11

Browse online or download pdf Operation Manual for Extender Cypress Suprex SPX-5600 Series. Cypress Suprex SPX-5600 Series 20 pages. Reader extender - rf wireless interface

Print Page

The Cypress SPX-5600 provides additional data channels to support access control hardware such as door strikes, tamper

alarms, request to exit status, etc. These signals are sent to and from the Remote and Central units without the need to run

additional wiring.

The accessory control I/O use active low inputs. When the inputs are ﬂoating (nothing connected) the associated output will be

set to a high level. When the input is set to 0Volts (Ground) the input will activate its associated output. All Accessory outputs

are Open Collector type and will switch to Ground when activated.

Each input will have an associated output. See the following pages for a diagram of each I/O pair.Inputs can be tested by

making a jumper connection to ground and monitoring the associated output.

Suprex RF Central

Suprex RF Remote

Page 11 of 20

Cypress Suprex 5600 Series - Door Strike and LED I/O

Input

LED In

Jumper to ground to test

Ground

Red arrow denotes direction of command signal

Output

LED Out