ASI FS-0500 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Dispenser ASI FS-0500. ASI FS-0500 6 pages.

Print Page

PODIUM MOUNTED AUTOMATIC GEL HAND SANITIZER DISPENSER (HSD) INSTALLATION GUIDE (Pg 2 of 4)

4. Connect clear supply flex tubing (provided attached to fitting on pump/control housing) to the 6L tank

(supplied) through the port in the cap so that tube end is just above bottom of tank. (see Figs. 4 and 4.a)

FLEX TUBE

MOTOR &

PUMP MODULE

SUPPLY TUBE

5. Install battery box (if so provided) on inside face of access door at predrilled screw holes with two (2) № 8 x

5/8" Type AB Phillips pan head stainless steel screws (provided). Load six (6) 'D'-size 1.5V cells (by others)

in battery carrier tray by removing two (2) Phillips screws and placing batteries according to polarity

indication. Re-install battery carrier tray and re-tighten the screws, plug battery cable jack into battery box

socket in cover handle and screw lock cover. Alternatively, plug AC Adapter (Model No 0390-ACA, if so

provided) into GFCI power outlet (by others) located within reach range of secured cable (straight length is

13.5 ft [4115] and will be reduced by securing wraps and allowable slack) on tank handle (or other securing

means, by others) and plug connector into mating inline power connector. (see Fig. 5)

AMERICAN SPECIALTIES, INC.

441 Saw Mill River Road, Yonkers, NY 10701

(914) 476.9000 • (914) 476.0688

www.americanspecialties.com

Fig. 4

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

COM CABLE

SANITIZER

DISPENSER

PRIME BUTTON

1/16" [2]

Fig. 5

MODEL №:

ISSUED:

REVISED:

SUPPLY TUBE

Fig. 4.a

0390-HSD

30 SEP 2020

7 OCT 2020