AERMEC PCO5 User Manual - Page 14

Browse online or download pdf User Manual for Control Panel AERMEC PCO5. AERMEC PCO5 20 pages.

Print Page

7.10 SETTINGS FREE GLYCOL FREECOOLING

— Indicates to which compressor the displayed data refers (U:1 = Master; U:2 =

Slave 1; U:3 = Slave 2; U:4 = Slave 3)

— Indicates the value in kW declared for freecooling (circuit 1)

— Indicates the value in kW declared for freecooling (circuit 2)

— Indicates the value in kW declared for freecooling (circuit 3)

— Indicates the value in kW declared for freecooling (circuit 4)

— Indicates the value of compressor 1 in kW

— Indicates the value of compressor 2 in kW

— Indicates the value of compressor 3 in kW

— Indicates the value of compressor 4 in kW

— Indicates the differential between the outside air and the water temperature at

unit inlet at which the freecooling power on circuit 1 is declared

— Indicates the differential between the outside air and the water temperature at

unit inlet at which the freecooling power on circuit 2 is declared

— Indicates the differential between the outside air and the water temperature at

unit inlet at which the freecooling power on circuit 3 is declared

— Indicates the differential between the outside air and the water temperature at

unit inlet at which the freecooling power on circuit 4 is declared

— Indicates the outlet temperature from the freecooling coil below which the fans

are inhibited

— Indicates the differential (applied to the freecooling coil output) beyond which

the fans are enabled at maximum speed

— Indicates the forcing time for the glycol pump at start-up

— Indicates the activation set of the anti-freeze resistance for the glycol side

7.11 CONFIGURING THE C-TOUCH CLOCK AND THE PCO5

CLOCK

— Indicates to which compressor the displayed data refers (U:1 = Master; U:2 =

Slave 1; U:3 = Slave 2; U:4 = Slave 3)

— Indicates the current day of the week on the C-Touch timer

— Indicates the current time on the C-Touch timer

— Indicates the current date on the C-Touch timer

— Indicates the current time on the pCO5 timer

— Indicates the current date on the pCO5 timer

— Indicates the time to set on the pCO5 timer

— Indicates the date to set on the pCO5 timer

— Allows setting the specified date and time on the pCO5 board

— Indicates to which compressor the displayed data refers (U:1 = Master; U:2 =

Slave 1; U:3 = Slave 2; U:4 = Slave 3)

— Indicates the current software version for the pCO5 card