Cyrus dAD3 User Instructions - Page 6

Browse online or download pdf User Instructions for CD Player Cyrus dAD3. Cyrus dAD3 6 pages.

Print Page

Cyrus dAD3

TROUBLESHOOTING GUIDE

If your Cyrus dAD3 is not operating properly, disconnect the power and

check all connections using the notes in this handbook. If problems

persist, the checklist below may help.

If you are in any doubt, consult your dealer.

Disc Spinning with no sound

Switch off the power to the audio system and check that connections have

been correctly made from the Cyrus dAD3 to the amplifier.

If used with another D/A converter, check the connection from the

'DIGITAL OUT' socket of the Cyrus dAD3 to the D/A converter. Check

also that power is applied to the D/A converter and amplifier and that the

input selection and volume control of these units is correctly set.

Pause may have been set. Check for the pause symbol on the display.

Press the PLAY/PAUSE key again on the front panel or handset to cancel

pause.

Skipping tracks or distorted sound

The disc may be dirty or badly scratched. Try playing another disc. If the

other disc plays ok, try cleaning the 1

Indication 'EO' on the display (Error: Operating)

A function has been selected which is not available.

Indication 'EP' on the display (Error: Programming)

An incorrect key sequence has been used during programming.

Indication 'Ed' on the display (Error: Disc)

The disc will not read. It may be dirty or defective.

No display

The display may have been switched off at the handset. Press the display

key again to restore the display and backlight.

No Remote Operation

The handset batteries may need to be replaced:

Remove the battery compartment cover located underneath the unit.

Remove the batteries and replace with new ones carefully noting the

orientation marked in the bottom of the battery case.

The batteries in the unit should only be replaced with new batteries type

AAA (I.E.C.L R03).

disc.

Laser Product

This label on the rear panel tells

you that the unit contains a Laser

component. Opening this unit will

expose the user to radiation from

the laser beam.

WARRANTY

The warranty card enclosed should be completed by the Dealer and

the purchaser and returned to CYRUS or its Distributor within 8 days

of purchase. No Dealer or Distributor may vary the terms of this

warranty which is personal to the original Purchaser and is not

transferable.

Please retain the sales receipt as proof of purchase.

Warranty claims must wherever possible be made through the Dealer

from whom the equipment was purchased.

This warranty excludes:

Damage caused through neglect, accident, misuse, wear and

tear, or through incorrect installation, adjustment or repair by

unauthorised personnel. Any unauthorised servicing will result in

loss of guarantee.

Liability for damage or loss occurring in transit to or from the

purchaser.

Consequential damage, loss or injury, arising from or in

conjunction with this equipment.

Equipment for attention under warranty should be consigned return

carriage paid. If returned equipment is found to comply with the

published specification, MISSION reserves the right to raise a charge.

The above conditions do not affect your statutory rights as a

consumer.

SPECIFICATIONS

Power Supply

Voltage:....................................................................As plate on rear of unit

Power Consumption

Playing ..................................................................................................12W

Standby...................................................................................................6W

Safety Requirements .................................................................... EN60065

Enclosure

Dimensions (WxHxD)..................................................... 215 x 75 x 365mm

Weight.................................................................................................3.1Kg

Material ..............................................................................Die cast chassis

Audio Performance

Output Level......................................................................................2V rms

Input Impedance ..................................................................................50

Frequency Response ............................................................. 20-20,000Hz

Channel Separation .............................................................>95dB @ 1kHz

SNR (using silent track) .................................................................. >98dBA

THD @ -10dB ..................................................................................0.008%

Cyrus reserves the right to change all specifications without notice. E &OE

User Instructions

>95dB@20kHz

G B