Ega Master EGATRONIK Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for Measuring Instruments Ega Master EGATRONIK. Ega Master EGATRONIK 16 pages. Non-contact ac voltage detector
Also for Ega Master EGATRONIK: Operating Instructions Manual (17 pages), Operating Instructions Manual (13 pages)
Print Page
A. General Service
Periodically wipe the case with damp cloth and mild de tergent. Do not use chemical solvent.
To clean the terminals with cotton-tipped swab with de tergent, as dirt or moisture in the
terminals can affect readings.
Press the Meter power off when it is not in use and take out the battery when not using for a long
time.
Do not store the Meter in place of humidity, high tem perature, explosive, inflammable and
strong magnetic field
B. Replacing the Battery (see figure 5)
Warning
To replace battery:
1. Press the Meter power off
2. Remove the screw from the battery compartment, and then take out the battery door from the
battery compart ment.
3. Remove the battery from the battery compartment.
4. Replace the battery with 4pcs new 1.5V AA batteries 5. Rejoin the battery door and the
battery compartment, and install the screw.
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the device being
incorrectly used or, applied for a purpose for whith it was not intended.
According to Waste Electrical and Electronic Equipment directive (WEEE), these ones must
be collected and arranged separately. If you have to throw them out, please, do not use the usual
rubbish. Please, contact your distributor for free recycling.
10
To avoid false readings replace the battery as soon as the battery indicator
figure 5
appears.
NOTES