Ega Master EGATRONIK Operating Instructions Manual - Page 9
Browse online or download pdf Operating Instructions Manual for Measuring Instruments Ega Master EGATRONIK. Ega Master EGATRONIK 16 pages. Non-contact ac voltage detector
Also for Ega Master EGATRONIK: Operating Instructions Manual (17 pages), Operating Instructions Manual (13 pages)
Print Page
Overloading
DC analogue
signal output
100Ω, 10mV/dB
600Ω, 0.707V/
Power (HOLD)
LEVEL (AUTO)
A-Weighting and
A/C (RECALL/
C-Weighting
CLR)
Selection of fast
or slow sampling
FAST/SLOW
rate and turn on
(STORE/BL)
and off of display
maximum and
MAX/MIN (Auto
minimum value.
ranging)
Selection of auto
power on and off
This section provides basic maintenance information including battery replacement instruction.
Do not attempt to repair or service your Meter unless you are qualified to do so
and have the relevant calibration, performance test, and service information.
To avoid electrical shock or damage to the Meter, do not get water inside the
Warning
In order not to affect the Meter accuracy or damge to the Meter, do not open the
Output
impedance
around
Output
impedance
around
each scale
selection
backlight
Selection of
MAINTENANCE
case.
Meter housing
Over range
display: OVER
Under range
display: UNDER
Has input
terminal
Has input
terminal
Turn on and off
the Meter and
data holding
Selecting auto
and manual
ranging
RECALL/CLR.
Press to recall and
clear data
Press to store data
9