d&b audiotechnik Z Series Mounting Instructions - Page 6

Browse online or download pdf Mounting Instructions for Racks & Stands d&b audiotechnik Z Series. d&b audiotechnik Z Series 14 pages. Al flying adapter
Also for d&b audiotechnik Z Series: Mounting Instructions (8 pages), Mounting Instructions (7 pages), Mounting Instructions (11 pages), Rigging Manual (18 pages), Mounting Instructions (12 pages), Mounting Instructions (10 pages)

Print Page

Attaching the bracket to the cabinet

NOTICE!

▪ Only use the supplied and specified screws [2], otherwise there

a risk of damaging the threaded inserts.

▪ Always use the spring washers [3] to prevent the bolts from

slackening.

Tools required:

▪ Torx key (size #T45 - supplied with the bracket)

1. Attach the bracket to the two M8 threaded inserts on the rear

panel of the cabinet.

2. Insert the screws together with the spring washers and

U washers and tighten them.

Vertical alignment

To set the vertical angle, proceed as follows:

Tools required:

▪ Torx key (size #T45 - supplied with the bracket)

1. Slacken the fixing bolts [F].

2. Set the cabinet to the desired vertical angle.

3. Retighten the fixing bolts.

d&b Z5404/05/06 Mounting instructions 1.1 en