d&b audiotechnik Z Series Montaj Talimatları - Sayfa 6

Raflar ve Standlar d&b audiotechnik Z Series için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. d&b audiotechnik Z Series 14 sayfaları. Al flying adapter
Ayrıca d&b audiotechnik Z Series için: Montaj Talimatları (8 sayfalar), Montaj Talimatları (7 sayfalar), Montaj Talimatları (11 sayfalar), Arma Kılavuzu (18 sayfalar), Montaj Talimatları (12 sayfalar), Montaj Talimatları (10 sayfalar)

Attaching the bracket to the cabinet

NOTICE!

▪ Only use the supplied and specified screws [2], otherwise there

a risk of damaging the threaded inserts.

▪ Always use the spring washers [3] to prevent the bolts from

slackening.

Tools required:

▪ Torx key (size #T45 - supplied with the bracket)

1. Attach the bracket to the two M8 threaded inserts on the rear

panel of the cabinet.

2. Insert the screws together with the spring washers and

U washers and tighten them.

Vertical alignment

To set the vertical angle, proceed as follows:

Tools required:

▪ Torx key (size #T45 - supplied with the bracket)

1. Slacken the fixing bolts [F].

2. Set the cabinet to the desired vertical angle.

3. Retighten the fixing bolts.

d&b Z5404/05/06 Mounting instructions 1.1 en