Bluesound A860 Owner's Manual - Page 8

Browse online or download pdf Owner's Manual for Amplifier Bluesound A860. Bluesound A860 11 pages.

Print Page

TROUBLESHOOTING

CONDITION

No power

A860 always at standby mode

No audio

No sound one channel

Weak bass/diffused stereo image

POSSIBLE CAUSES

• Power cord is disconnected.

• Rear panel POWER switch not at ON setting

• TRIGGER OFF/ON/AUTO switch set to

"AUTO" position

• AC power cord unplugged or POWER switch

not at ON setting

• No input signal applied through the rear

panel INPUT terminals

• GAIN control level at minimum setting

• LOCAL/GLOBAL switch is set to LOCAL (or

GLOBAL)

• Speaker not properly connected or damaged

• Input lead disconnected or damaged

• Speakers wired out of phase

POSSIBLE SOLUTIONS

• Connect AC power cord to mains power

outlet securely

• Set the rear panel POWER switch to ON

setting

• Slide the TRIGGER OFF/ON/AUTO switch

to "OFF" position

• Connect AC power cord to mains power

outlet securely

• Set the rear panel POWER switch to ON

setting

• Check that there is active input signal

applied through the rear panel INPUT

terminals

• Adjust GAIN control level until audio is

heard.

• Set LOCAL/GLOBAL switch to corresponding

input terminal (LOCAL or GLOBAL)

• Check connections and speakers

• Check leads and connections

• Check speaker connections