Ambient NanoLockit Manual - Page 9
Browse online or download pdf Manual for Camera Accessories Ambient NanoLockit. Ambient NanoLockit 19 pages. Timecode + logging
Also for Ambient NanoLockit: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Up Manual (20 pages), Quick Start Manual (5 pages), Manual (4 pages), Tutorial (5 pages), Quick Manual (2 pages)
5.2 C-Jam Mode (Continuous Jam)
The C-Jam Transmitter can either be a Lockit, LockitSlate or Lockit+.
In C-Jam Mode we utilize our ACN network to completely prevent any drift. In
this mode one Lockit device acts as a C-Jam Master. It sends a pulse through
the ACN every six seconds to constantly align with all other Lockit boxes.
To start the unit as C-Jam Master press and hold
Green
Press and hold
The icon on the display will switch to M.
All other Lockits (that are on the same ACN channel) will now automatically
follow the C-Jam Master and display an ACN icon at the lower right of the
display.
Since even in C-Jam Mode every unit still uses its own VCO (voltage-controlled
oscillator) to generate timecode (and sync), they don't necessarily have to be
in range of the C-Jam master constantly to be accurate.
Lockit devices that are powered up at a later point in time will automatically
follow the C-Jam Master and set their timecode and frame rate accordingly.
Note: Just one unit is allowed to be the C-Jam Master within an ACN channel. A
second master will be blocked and will also automatically follow the C-Jam Master
and display an ACN icon at the lower right of the display.
On the display you will see an (M)
appear, indicating that the device
is ready to go.
to confirm the timecode and start the C-Jam.
Green, then tap
Power.
Lockit Users manual |
09