amc VIBRO AVM 1002D Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} amc VIBRO AVM 1002D. amc VIBRO AVM 1002D 14 pagina's. Vibration monitoring system with relay outputs
Pagina afdrukken
5. Electrical connectors
Figure 5-1// Connectors description
Figure 5-2 // 4..20mA current loop connection
6. Activation
After connecting the power, the AVM 1002D module enters into testing procedure. Subsequently all
display's segments and LEDs will flash for a short period of time. If everything is operating properly,
then green OK LED is pulsing with a frequency of approximately 1 Hz. Once the testing procedure is
over, the device is ready to operate. If an error of a sensor circuit is detected, then corresponding LED
will lit.
6
AV MONITOR 1002D