amc VIBRO AVM 1002D Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe amc VIBRO AVM 1002D. amc VIBRO AVM 1002D 14 stron. Vibration monitoring system with relay outputs
Drukuj stronę
5. Electrical connectors
Figure 5-1// Connectors description
Figure 5-2 // 4..20mA current loop connection
6. Activation
After connecting the power, the AVM 1002D module enters into testing procedure. Subsequently all
display's segments and LEDs will flash for a short period of time. If everything is operating properly,
then green OK LED is pulsing with a frequency of approximately 1 Hz. Once the testing procedure is
over, the device is ready to operate. If an error of a sensor circuit is detected, then corresponding LED
will lit.
6
AV MONITOR 1002D