AMCI SD7540A Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AMCI SD7540A. AMCI SD7540A 16 pagina's.

ADV ANC ED
MIC RO CON T RO L S INC.
9. If a change to a setting is required, the new setting is selected from the appropriate field.
By pressing the Defaults button, the default settings will appear:
RESOLUTION
IDLE 20 %;
CURRENT 80 %;
10. By pressing the Apply button, the new settings will be saved in the drive's nonvolatile
memory. The process of saving and verifying the new settings will take about 8 seconds.
During this time a warning to wait is displayed in the status display of the window. When the
process ends, a message that the command is accepted is displayed.
11. Pressing the Test On button starts the self test. The motor will move back and forth quarter
of a revolution with slow speed until the Test button is pressed again. The LED of the
SD7540A will blink indicating the application of drive steps.
Pressing the Recall button (in the menu above) will display the SD7540A's current settings in the
data windows.

ERROR MESSAGES:

20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786
Tel: (860) 585-1254
Fax: (860) 584-1973
2000 steps/revolution;
Web: www.amci.com
SD7540A Stepper Drive
Check if power is applied to the motor;
Check the wire connection;
Check if the correct COM port is
;
selected
page: 15