AMCI SD7540A Kullanıcı Kılavuzu - Sayfa 15

Kontrol Ünitesi AMCI SD7540A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMCI SD7540A 16 sayfaları.

ADV ANC ED

MIC RO CON T RO L S INC.

9. If a change to a setting is required, the new setting is selected from the appropriate field.

By pressing the Defaults button, the default settings will appear:

•

RESOLUTION

•

IDLE 20 %;

•

CURRENT 80 %;

10. By pressing the Apply button, the new settings will be saved in the drive's nonvolatile

memory. The process of saving and verifying the new settings will take about 8 seconds.

During this time a warning to wait is displayed in the status display of the window. When the

process ends, a message that the command is accepted is displayed.

11. Pressing the Test On button starts the self test. The motor will move back and forth quarter

of a revolution with slow speed until the Test button is pressed again. The LED of the

SD7540A will blink indicating the application of drive steps.

Pressing the Recall button (in the menu above) will display the SD7540A's current settings in the

data windows.

ERROR MESSAGES:

20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786

Tel: (860) 585-1254

Fax: (860) 584-1973

2000 steps/revolution;

Web: www.amci.com

SD7540A Stepper Drive

•

Check if power is applied to the motor;

•

Check the wire connection;

•

Check if the correct COM port is

;

selected

page: 15