Amcor NanoMax Series Installatie-instructies - Pagina 2
Blader online of download pdf Installatie-instructies voor {categorie_naam} Amcor NanoMax Series. Amcor NanoMax Series 2 pagina's. Nanomax portable air conditioner with innovative autodrain nanomist technology
Ook voor Amcor NanoMax Series: Gebruikershandleiding (16 pagina's)
Pagina afdrukken
Continued from Reverse Side
5
7
3. Installation of the Window Kit
1. Place Adjustable Slide Bar (D) in the window and expand
so it fits tightly.
2. Mark Slide Bar to record width of the window.
3. Apply Insulation Strip (E) on top and bottom of Slide Bar.
4. Reposition Slide Bar Connector in the window.
Expand the Slide Bar to fit tight. Tighten the screws.
5. Lower the window.
6. Make sure Hose has no kinks.
4. Turning the Unit On
1. Plug the unit into a working electrical outlet.
2. Press the unit's ON/OFF Button on the control panel.
It may take a few minutes before cold air is dispersed.
3. If unit doesn't turn on, press top Reset Button on plug, shown
at right, and plug back in outlet. Green light should be on.
4. Adjust FAN Speed by pressing the FAN Button until
the preferred fan speed is reached.
5. Press the Timer Button to Set.
Assemble the
hot air hose on
the unit.
Unfold flexible
hose with
attached hose
adapter
connector,
and snap into
Window
Slide Bar.
6
8
Green Light
Clip on the
water atomizer
at the end of
the spiral pipe
to the holder.
Only
Required For
Dissassembly.
In order to
unlock the quick
connector, push
the tab and turn
the connector
90 degrees
counter-clockwise.
Adjustable
Slide Bar
Slide Bar
Connector
Hose
Reset Button
RESET
TEST