Canon AE-1 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Canon AE-1. Canon AE-1 42 pagina's.
Ook voor Canon AE-1: Aan de slag (2 pagina's), Gebruiksaanwijzing (22 pagina's), Handleiding voor installatieprocedures (48 pagina's), Handmatig (12 pagina's), Gebruiksaanwijzing (22 pagina's)

Photography with earlier flash unit 155A automatic Flash photography (Or any dedicated

flash units by Canon)

1. Load the batteries.

2. Set the ASA film speed

6. Focus, compose and press the shutter button to take the picture.

Photography with the Canon Power Winder A

1. Remove the Battery Pack A.

2. Load the batteries into the Battery Pack A.

3. Attach the Battery Pack A to the Power Winder A.

4. Take off the winder coupler cover.

5. Attach the Power Winder A to the AE-1.

6. Turn the main switch on.

7. Focus and press the shutter button.

Preliminary Preparation for AE-1

Attaching the

Attach the Canon AE-1's neckstrap by

Neckstrap

threading it through the rings and adjusting it

to the desired length as indicated in the

photos. A case for a spare battery can be

attached to the neckstrap.

3. Mount the Speedlite 155A

(Or equivalent) onto the camera

Handling the Lens Cap

The lens cap can be removed from the front of the lens after

pressing in the tabs on both sides of the cap. The rear dust

cover can be removed by turning the bayonet ring in the

direction of the arrow.

4. Turn the main swittch5. Set the AUTO/MANUAL switch