D2G Gravitee GK-1014 Installatie-instructies - Pagina 4

Blader online of download pdf Installatie-instructies voor {categorie_naam} D2G Gravitee GK-1014. D2G Gravitee GK-1014 11 pagina's. 10' x 10' display

Order #XXXXX

Side-by-Side Assembly

1) Frames: Place frames side-by-side with one higher than the

other, then slide panel down to lock panels securely together.

2) Corner Connectors: Repeat Step 1 for installing corner

connectors to frames.

Side-by-Side

Disassembly

1) Pull pin lock outwards to disengage.

2) Pull frames upward and apart at the same time to detatch.

Stacking Assembly

1) Place one horizontal frame on top of the other, lining up the

center grooves.

2) Turn stacking lock clockwise to tighten into place. Repeat

for each lock.

Stacking Disassembly

1) Turn the stacking lock counter-clockwise to loosen.

2) The whole spring on the stacking lock should be in view to

release each frame. The disengaged spring should release

the stacking lock. If not, keep turning the stacking lock until

it disengages.

Gravitee Panel Assembly

Assembly

Stacking

Push stacking lock into the slot

of the upper frame, then spin the

cap to tighten the lock.

Stacking

Lock

Assembly Cont'd

Push pin lock into hole of connecting frame.

Note: Block of pin lock will secure in groove.

Unstacking

Cap

Corner Connector

SEG

Grooves

Pin Lock

Top View

Note: Orientation of Corner

Connector may change.

Disengage the stacking lock by

spinning the cap counter

clockwise and pulling down.