D2G Gravitee GK-1014 Kurulum Talimatları - Sayfa 4
İç Mekan Mobilyaları D2G Gravitee GK-1014 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. D2G Gravitee GK-1014 11 sayfaları. 10' x 10' display
Sayfayı Yazdır
© 2022
Order #XXXXX
Side-by-Side Assembly
1) Frames: Place frames side-by-side with one higher than the
other, then slide panel down to lock panels securely together.
2) Corner Connectors: Repeat Step 1 for installing corner
connectors to frames.
Side-by-Side
Disassembly
1) Pull pin lock outwards to disengage.
2) Pull frames upward and apart at the same time to detatch.
Stacking Assembly
1) Place one horizontal frame on top of the other, lining up the
center grooves.
2) Turn stacking lock clockwise to tighten into place. Repeat
for each lock.
Stacking Disassembly
1) Turn the stacking lock counter-clockwise to loosen.
2) The whole spring on the stacking lock should be in view to
release each frame. The disengaged spring should release
the stacking lock. If not, keep turning the stacking lock until
it disengages.
Gravitee Panel Assembly
Assembly
Stacking
Push stacking lock into the slot
of the upper frame, then spin the
cap to tighten the lock.
Stacking
Lock
Assembly Cont'd
Push pin lock into hole of connecting frame.
Note: Block of pin lock will secure in groove.
Unstacking
Cap
Corner Connector
SEG
Grooves
Pin Lock
Top View
Note: Orientation of Corner
Connector may change.
Disengage the stacking lock by
spinning the cap counter
clockwise and pulling down.