Ekinex EK-SN2-TP Gebruiksaanwijzing

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ekinex EK-SN2-TP. Ekinex EK-SN2-TP 7 pagina's. Knx standard wall presence detector with movement function

Pagina afdrukken

KNX standard wall presence detector

with movement function

Code: EK-SN2-TP

Device for motion/presence detection with PIR sensors

(passive infrared) in a semicircular area. The ideal use

is in corridors, transit areas, services, stairwells, envi-

ronments with occasional occupancy. It has dedicated

channels for controlling lighting, HVAC equipment and

alarms. It also allows the measurement of brightness in

the environment. It has an integrated KNX bus commu-

nication module and is designed for installation in a wall-

mounting box; it is powered by the KNX bus and does not

require an auxiliary power supply.

Description

The ekinex® sensor EK-SN2-TP is a KNX standard pre-

sence detector, wall switch type, which uses passive in-

frared (PIR) motion detection technology to automatically

switch on or off the connected lighting or HVAC devices,

when the monitored space is occupied or free according

to the detector settings. Simple installation and quick

setup allow you to replace or complement existing wall

switches. It is designed for use in interiors such as shops,

offices, small rooms, living spaces such as corridors, stai-

rs, bedrooms, etc.

Main functional characteristics

• Hidden switch, can fit single round or square wall flush-

mounting box

• Simple and safe plug-in installation

• The presence detector is used to control devices, e.g.

lighting and HVAC

• Learning function, to configure the device functions by

reading the "ambient Lux" parameter

Datasheet STEKSN2TP_EN

• Evolved lens model, with well-distributed and concen-

trated detection capabilities: the detection beams pro-

vide high intensity and sensitivity, to detect even small

shaking movements

• Adjustable sensitivity via ETS on 4 levels

• Possibility of Master / Slave configuration (via ETS)

• Operating modes: Manual ON / AUTO / OFF

• Use in the KNX TP bus system (twisted pair) in combi-

nation with other KNX devices

• Function parameters and settings via ETS 5.0 (Engine-

ering Tool Software) or higher

Technical data

• Rated voltage: 24 Vdc (21 - 30 Vdc) supplied by KNX

bus

• Current consumption (on KNX bus): max 10 mA (opera-

tion) / 5 mA (Standby)

• Connection type: KNX bus with Ø 0.8 mm, single cable

• Outputs: 5 channels (2 for lighting, 2 for HVAC, 1 for

alarm)

• Mounting height: 1.2 - 2.0 m

• Detection angle: up to 200 °

• Detection range: up to 9 m if mounted at a height betwe-

en 1.2 - 1.5 m, up to 8 m at a height between 1.8 - 2.0 m

• Light measurement range: 10 ... 2000 Lux

• Housing, lens and frame in plastic material

• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN

55014 / EN 50491

Other characteristics

• Housing, lens and frame in plastic material

• Wall installation in flush mounting box

• Protection degree IP20 (installed device)

• Climatic classification 3K5 and mechanical 3M2 (accor-

ding to EN 50491-2)

• Pollution degree 2 (according to IEC 60664-1)

• Weight 40 g (70 g with mounting support)

• Dimensions 80 x 80 x 31 mm

Environmental conditions

• Operating temperature: - 20 ... + 40°C

• Relative humidity: 95% not condensing

Versions

Code

Colour

EK-SN2-TP-GAA

white

EK-SN2-TP-GAE

black

Delivery and accessories

The fixing screws and the terminal for connecting to the

KNX bus are included in the supply of the device. This

must be completed with a plastic adapter, a plate and

eventually a frame (all have to be ordered separately).

Finishing plate

The sensor is completed with an ekinex

Fenix NTM

material. The plate must have (at least) a 50

x 50 mm window in combination with a plastic adapter for

'NF, Deep or Surface series mounting.

Application program

(## = version)

APEKSN2TP##.knxprod

plate in metal or