Dontek AQUASMART 5 SV Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dontek AQUASMART 5 SV. Dontek AQUASMART 5 SV 13 pagina's.

Pagina afdrukken

ENTER BUTTON

Pressing the ENTER button will turn on the LCD backlight. Pressing the ENTER button while the backlight is lit will

enter the SETTINGS MENU. The following will be displayed:

1) EXIT, the menu system can be navigated using the ↑ or ↓ buttons. All selectable and changeable values will

flash on the LCD screen. Press the ENTER button to accept the currently displayed (flashing) item.

All menu items are shown below:

1) EXIT

2) HEATER TIMERS

3) SYSTEM

1) EXIT

Will save changes and return to automatic operation.

HEATER RUN TIMES – When the HEATER RUN TIMES is selected the following is displayed:

No. OF TIMES PER

DAY TO RUN: x

Select the number of times per day you wish the AUX Heating to operate. If OFF is selected

then the pump will only operate for Solar Heating purposes, otherwise the following is

displayed:

One time per day menu:

HEATER CYCLE 1 menu:

HEATER CYCLE

xx:xx TO xx:xx

Twice per day HEATER CYCLE 2 menu:

HEATER CYCLE 1

xx:xx TO xx:xx

2) HEATER

Adjust the start time and end time for the required heater cycle(s). The circulation pump will

TIMERS

run between these times for AUX heating purposes.

**Factory Default is ON, ONE TIME PER DAY FROM 06:00 to 22:00.

Note 1: Take care not to overlap heater cycle 2 times with the heater cycle 1 times as the

result will be one cycle per day.

Note 2: For 24hr heating, set the heating to run 1 time per day with the start & end times

the same (E.g. 12:00 – 12:00).

Note 3: If the unit is configured to run the heater parallel to the solar, the controller will

not run the heater in conjunction with the solar collectors. It will only run them

individually.

Note 4: When the roof temp probe exceeds the AUX LIMIT + 15

energy to heat the pool. The auxiliary heating is switched off to save energy. The auxiliary

heater remains switched off until the roof temperature drops below AUX LIMIT + 10

won't matter if the controller has been configured to run the heater parallel or in-line with

the solar for this to occur.

EXIT - Press ENTER on this menu to return to automatic operation.

SET CLOCK – Allows you to adjust calendar date and time of day.

3) SYSTEM

LCD BACKLIGHT – Adjust the number of seconds the backlight remains on after the time a

button was pressed. (Select NONE for always on.)

AQUASMART 5 SV v1.4

HEATER CYCLE 2

xx:xx TO xx:xx

C, there is enough solar

C. It