Amerisolar Wolfram-BAT-10.24 Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Amerisolar Wolfram-BAT-10.24. Amerisolar Wolfram-BAT-10.24 20 pagina's.

Worldwide Energy and Manufacturing USA Co., Limited

Battery self-discharge rate

Factory SOC state

Insulation resistance

Weight

Dimensions (width * depth

*height)

Installation location

4. Installation

The following tools are required to install this product. Installation tool confirmation.

Screwdriver

Note:

•Use properly insulated tools to prevent accidental electric shock or short circuit;

•If there is no insulated tool, please use electrical tape to cover the entire bare metal surface

of the available tool (except the tip). When handling the battery, it is recommended to wear

the following safety equipment.

Insulated gloves

When installing, moving and placing the battery system, please always follow the instructions

in the manual. Improper operation may cause minor injuries, severe injuries or contusions.

Step 1: Install the backplane

≤5%（25℃，50%SOC）

30-40%

>200MΩ

170kg

700*230*1270mm（With feet height 1340mm）

Indoor/outdoor

Goggles

Socket wrench

Safety shoes