Door-Gard 232iLM Instructies voor installatie en programmering - Pagina 5
Blader online of download pdf Instructies voor installatie en programmering voor {categorie_naam} Door-Gard 232iLM. Door-Gard 232iLM 8 pagina's. Keypad
Pagina afdrukken232iLM Keypad Installation & Programming
Wiring the Bell Output to a Speaker:
The SSWiLM keypad has a built in bell button, which triggers a relay output when pressed. This relay is normally open
and the contact closes when triggered. You can use this relay output to trigger devices that require a momentary closure,
such as a doorbell. The relay output provides a dry contact, but you can run up to 24 VDC or 125 VAC through it for
devices that require power to operate. The diagram below shows these connections.
Keypad Mounting Height
Mounting height can vary depending on requirements. An appropriate range is typically between 48 and 52 inches on
center off the fl oor.
6-050800 X2
5